# Copyright (c) 2016, Xilinx, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION). HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
from pynq import MMIO
from pynq import PL
__author__ = "Graham Schelle"
__copyright__ = "Copyright 2016, Xilinx"
__email__ = "pynq_support@xilinx.com"
RGBLEDS_XGPIO_OFFSET = 0
RGBLEDS_START_INDEX = 4
RGB_CLEAR = 0
RGB_BLUE = 1
RGB_GREEN = 2
RGB_CYAN = 3
RGB_RED = 4
RGB_MAGENTA = 5
RGB_YELLOW = 6
RGB_WHITE = 7
[docs]class RGBLED(object):
"""This class controls the onboard RGB LEDs.
Attributes
----------
index : int
The index of the RGB LED, from 4 (LD4) to 5 (LD5).
_mmio : MMIO
Shared memory map for the RGBLED GPIO controller.
_rgbleds_val : int
Global value of the RGBLED GPIO pins.
"""
_mmio = None
_rgbleds_val = 0
def __init__(self, index):
"""Create a new RGB LED object.
Parameters
----------
index : int
Index of the RGBLED, from 4 (LD4) to 5 (LD5).
"""
if index not in [4, 5]:
raise ValueError("Index for onboard RGBLEDs should be 4 or 5.")
self.index = index
if RGBLED._mmio is None:
base_addr = PL.ip_dict["rgbleds_gpio"]["phys_addr"]
RGBLED._mmio = MMIO(base_addr, 16)
[docs] def on(self, color):
"""Turn on a single RGB LED with a color value (see color constants).
Parameters
----------
color : int
Color of RGB specified by a 3-bit RGB integer value.
Returns
-------
None
"""
if color not in range(8):
raise ValueError("color should be an integer value from 0 to 7.")
rgb_mask = 0x7 << ((self.index-RGBLEDS_START_INDEX)*3)
new_val = (RGBLED._rgbleds_val & ~rgb_mask) | \
(color << ((self.index-RGBLEDS_START_INDEX)*3))
self._set_rgbleds_value(new_val)
[docs] def off(self):
"""Turn off a single RGBLED.
Returns
-------
None
"""
rgb_mask = 0x7 << ((self.index-RGBLEDS_START_INDEX)*3)
new_val = RGBLED._rgbleds_val & ~rgb_mask
self._set_rgbleds_value(new_val)
[docs] def write(self, color):
"""Set the RGBLED state according to the input value.
Parameters
----------
color : int
Color of RGB specified by a 3-bit RGB integer value.
Returns
-------
None
"""
self.on(color)
[docs] def read(self):
"""Retrieve the RGBLED state.
Returns
-------
int
The color value stored in the RGBLED.
"""
return (RGBLED._rgbleds_val >>
((self.index-RGBLEDS_START_INDEX)*3)) & 0x7
@staticmethod
def _set_rgbleds_value(value):
"""Set the state of all RGBLEDs.
Note
----
This function should not be used directly. User should call
`on()`, `off()`, instead.
Parameters
----------
value : int
The value of all the RGBLEDs encoded in a single variable.
"""
RGBLED._rgbleds_val = value
RGBLED._mmio.write(RGBLEDS_XGPIO_OFFSET, value)