# Copyright (c) 2016, Xilinx, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1. Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# 3. Neither the name of the copyright holder nor the names of its
# contributors may be used to endorse or promote products derived from
# this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION). HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
import collections
import ctypes
import itertools
import os
import re
import struct
import warnings
from copy import deepcopy
from .mmio import MMIO
from .ps import Clocks
from .bitstream import Bitstream
from .interrupt import Interrupt
from .gpio import GPIO
from .registers import RegisterMap
from .registers import Register
from .utils import ReprDict
from .utils import _ExtensionsManager
from pynq._3rdparty import ert
__author__ = "Yun Rock Qu"
__copyright__ = "Copyright 2016, Xilinx"
__email__ = "pynq_support@xilinx.com"
DRIVERS_GROUP = "pynq.lib"
[docs]class UnsupportedConfiguration(Exception):
"""Thrown by a driver that does not support the requested configuration
of an IP.
If a driver's __init__ throws this exception the binding system will
issue a warning and instead create a DefaultIP instance.
"""
pass
def _assign_drivers(description, ignore_version, device):
"""Assigns a driver for each IP and hierarchy in the description.
"""
for name, details in description['hierarchies'].items():
_assign_drivers(details, ignore_version, device)
details['device'] = device
details['driver'] = DocumentHierarchy
for hip in _hierarchy_drivers:
if hip.checkhierarchy(details):
details['driver'] = hip
break
for name, details in description['ip'].items():
details['device'] = device
ip_type = details['type']
if ip_type in _ip_drivers:
details['driver'] = _ip_drivers[ip_type]
else:
no_version_ip = ip_type.rpartition(':')[0]
if no_version_ip in _ip_drivers:
if ignore_version:
details['driver'] = _ip_drivers[no_version_ip]
else:
other_versions = [v for v in _ip_drivers.keys()
if v.startswith(no_version_ip + ":")]
message = (
"IP {0} is of type {1} and driver found for [{2}]. " +
"Use ignore_version=True to use this driver."
).format(details['fullpath'],
details['type'],
", ".join(other_versions))
warnings.warn(message, UserWarning)
details['driver'] = DefaultIP
else:
details['driver'] = DefaultIP
def _complete_description(ip_dict, hierarchy_dict, ignore_version,
mem_dict, device):
"""Returns a complete hierarchical description of an overlay based
on the three dictionaries parsed from HWH file.
"""
starting_dict = dict()
starting_dict['ip'] = {k: v for k, v in ip_dict.items()}
starting_dict['hierarchies'] = {k: v for k, v in hierarchy_dict.items()}
starting_dict['interrupts'] = dict()
starting_dict['gpio'] = dict()
starting_dict['memories'] = {re.sub('[^A-Za-z0-9_]', '', k): v
for k, v in mem_dict.items() if v['used']}
starting_dict['device'] = device
_assign_drivers(starting_dict, ignore_version, device)
return starting_dict
_class_aliases = {
'pynq.overlay.DocumentOverlay': 'pynq.overlay.DefaultOverlay',
'pynq.overlay.DocumentHierarchy': 'pynq.overlay.DefaultHierarchy'
}
def _classname(class_):
"""Returns the full name for a class. Has option for overriding
some class names to hide internal details. The overrides are
stored in the `_class_aliases` dictionaries.
"""
rawname = "{}.{}".format(class_.__module__, class_.__name__)
if rawname in _class_aliases:
return _class_aliases[rawname]
else:
return rawname
def _build_docstring(description, name, type_):
"""Helper function to build a documentation string for
a hierarchical description.
Parameters
----------
description : dict
The description to document.
name : str
The name of the object - inserted into the doc string
type_ : str
The type of the object - generally 'overlay' or 'hierarchy'
Returns
-------
str : The generated documentation string
"""
lines = list()
lines.append("Default documentation for {} {}. The following"
.format(type_, name))
lines.append("attributes are available on this {}:".format(type_))
lines.append("")
lines.append("IP Blocks")
lines.append("----------")
if description['ip']:
for ip, details in description['ip'].items():
lines.append("{0: <20} : {1}"
.format(ip, _classname(details['driver'])))
else:
lines.append("None")
lines.append("")
lines.append("Hierarchies")
lines.append("-----------")
if description['hierarchies']:
for hierarchy, details in description['hierarchies'].items():
lines.append("{0: <20} : {1}"
.format(hierarchy, _classname(details['driver'])))
else:
lines.append("None")
lines.append("")
lines.append("Interrupts")
lines.append("----------")
if description['interrupts']:
for interrupt in description['interrupts'].keys():
lines.append("{0: <20} : pynq.interrupt.Interrupt"
.format(interrupt))
else:
lines.append("None")
lines.append("")
lines.append("GPIO Outputs")
lines.append("------------")
if description['gpio']:
for gpio in description['gpio'].keys():
lines.append("{0: <20} : pynq.gpio.GPIO".format(gpio))
else:
lines.append("None")
lines.append("")
lines.append("Memories")
lines.append("------------")
if description['memories']:
for mem, mem_desc in description['memories'].items():
if 'streaming' in mem_desc and mem_desc['streaming']:
lines.append("{0: <20} : Stream".format(mem))
else:
lines.append("{0: <20} : Memory".format(mem))
else:
lines.append("None")
lines.append("")
lines.append("")
return '\n '.join(lines)
[docs]class Overlay(Bitstream):
"""This class keeps track of a single bitstream's state and contents.
The overlay class holds the state of the bitstream and enables run-time
protection of bindings.
Our definition of overlay is: "post-bitstream configurable design".
Hence, this class must expose configurability through content discovery
and runtime protection.
The overlay class exposes the IP and hierarchies as attributes in the
overlay. If no other drivers are available the `DefaultIP` is constructed
for IP cores at top level and `DefaultHierarchy` for any hierarchies that
contain addressable IP. Custom drivers can be bound to IP and hierarchies
by subclassing `DefaultIP` and `DefaultHierarchy`. See the help entries
for those class for more details.
This class stores four dictionaries: IP, GPIO, interrupt controller
and interrupt pin dictionaries.
Each entry of the IP dictionary is a mapping:
'name' -> {phys_addr, addr_range, type, config, state}, where
name (str) is the key of the entry.
phys_addr (int) is the physical address of the IP.
addr_range (int) is the address range of the IP.
type (str) is the type of the IP.
config (dict) is a dictionary of the configuration parameters.
state (str) is the state information about the IP.
Each entry of the GPIO dictionary is a mapping:
'name' -> {pin, state}, where
name (str) is the key of the entry.
pin (int) is the user index of the GPIO, starting from 0.
state (str) is the state information about the GPIO.
Each entry in the interrupt controller dictionary is a mapping:
'name' -> {parent, index}, where
name (str) is the name of the interrupt controller.
parent (str) is the name of the parent controller or '' if attached
directly to the PS.
index (int) is the index of the interrupt attached to.
Each entry in the interrupt pin dictionary is a mapping:
'name' -> {controller, index}, where
name (str) is the name of the pin.
controller (str) is the name of the interrupt controller.
index (int) is the line index.
Attributes
----------
bitfile_name : str
The absolute path of the bitstream.
dtbo : str
The absolute path of the dtbo file for the full bitstream.
ip_dict : dict
All the addressable IPs from PS. Key is the name of the IP; value is
a dictionary mapping the physical address, address range, IP type,
parameters, registers, and the state associated with that IP:
{str: {'phys_addr' : int, 'addr_range' : int, \
'type' : str, 'parameters' : dict, 'registers': dict, \
'state' : str}}.
gpio_dict : dict
All the GPIO pins controlled by PS. Key is the name of the GPIO pin;
value is a dictionary mapping user index (starting from 0),
and the state associated with that GPIO pin:
{str: {'index' : int, 'state' : str}}.
interrupt_controllers : dict
All AXI interrupt controllers in the system attached to
a PS interrupt line. Key is the name of the controller;
value is a dictionary mapping parent interrupt controller and the
line index of this interrupt:
{str: {'parent': str, 'index' : int}}.
The PS is the root of the hierarchy and is unnamed.
interrupt_pins : dict
All pins in the design attached to an interrupt controller.
Key is the name of the pin; value is a dictionary
mapping the interrupt controller and the line index used:
{str: {'controller' : str, 'index' : int}}.
pr_dict : dict
Dictionary mapping from the name of the partial-reconfigurable
hierarchical blocks to the loaded partial bitstreams:
{str: {'loaded': str, 'dtbo': str}}.
device : pynq.Device
The device that the overlay is loaded on
"""
def __init__(self, bitfile_name, dtbo=None,
download=True, ignore_version=False, device=None):
"""Return a new Overlay object.
An overlay instantiates a bitstream object as a member initially.
Parameters
----------
bitfile_name : str
The bitstream name or absolute path as a string.
dtbo : str
The dtbo file name or absolute path as a string.
download : bool
Whether the overlay should be downloaded.
ignore_version : bool
Indicate whether or not to ignore the driver versions.
device : pynq.Device
Device on which to load the Overlay. Defaults to
pynq.Device.active_device
Note
----
This class requires a HWH file to be next to bitstream file
with same name (e.g. `base.bit` and `base.hwh`).
"""
super().__init__(bitfile_name, dtbo, partial=False, device=device)
self._register_drivers()
self.parser = self.device.get_bitfile_metadata(self.bitfile_name)
self.ip_dict = self.gpio_dict = self.interrupt_controllers = \
self.interrupt_pins = self.hierarchy_dict = dict()
self._deepcopy_dict_from(self.parser)
self.clock_dict = self.parser.clock_dict
self.pr_dict = dict()
self.ignore_version = ignore_version
description = _complete_description(
self.ip_dict, self.hierarchy_dict, self.ignore_version,
self.mem_dict, self.device)
self._ip_map = _IPMap(description)
if download:
self.download()
self.__doc__ = _build_docstring(self._ip_map._description,
bitfile_name,
"overlay")
def __getattr__(self, key):
"""Overload of __getattr__ to return a driver for an IP or
hierarchy. Throws an `RuntimeError` if the overlay is not loaded.
"""
if self.is_loaded():
return getattr(self._ip_map, key)
else:
raise RuntimeError("Overlay not currently loaded")
def _deepcopy_dict_from(self, source):
self.ip_dict = ReprDict(deepcopy(source.ip_dict), rootname='ip_dict')
self.gpio_dict = ReprDict(deepcopy(source.gpio_dict),
rootname='gpio_dict')
self.interrupt_controllers = ReprDict(
deepcopy(source.interrupt_controllers),
rootname='interrupt_controllers')
self.interrupt_pins = ReprDict(
deepcopy(source.interrupt_pins), rootname='interrupt_pins')
self.hierarchy_dict = ReprDict(deepcopy(source.hierarchy_dict),
rootname='hierarchy_dict')
self.mem_dict = ReprDict(deepcopy(source.mem_dict),
rootname='mem_dict')
[docs] def free(self):
if hasattr(self.device, 'free_bitstream'):
self.device.free_bitstream()
[docs] def download(self, dtbo=None):
"""The method to download a full bitstream onto PL.
After the bitstream has been downloaded, the "timestamp" in PL will be
updated. In addition, all the dictionaries on PL will
be reset automatically.
This method will use parameter `dtbo` or `self.dtbo` to configure the
device tree.
The download method will also configure some of the PS registers
based on the metadata file provided, e.g. PL clocks,
AXI master port width.
Parameters
----------
dtbo : str
The path of the dtbo file.
"""
for i in self.clock_dict:
if 'enable' in self.clock_dict[i]:
enable = self.clock_dict[i]['enable']
div0 = self.clock_dict[i]['divisor0']
div1 = self.clock_dict[i]['divisor1']
if enable:
Clocks.set_pl_clk(i, div0, div1)
else:
Clocks.set_pl_clk(i)
super().download(self.parser)
if dtbo:
super().insert_dtbo(dtbo)
elif self.dtbo:
super().insert_dtbo()
[docs] def pr_download(self, partial_region, partial_bit, dtbo=None):
"""The method to download a partial bitstream onto PL.
In this method, the corresponding parser will only be
added once the `download()` method of the hierarchical block is called.
This method always uses the parameter `dtbo` to configure the device
tree.
Note
----
There is no check on whether the partial region specified by users
is really partial-reconfigurable. So users have to make sure the
`partial_region` provided is correct.
Parameters
----------
partial_region : str
The name of the hierarchical block corresponding to the PR region.
partial_bit : str
The name of the partial bitstream.
dtbo : str
The path of the dtbo file.
"""
self.device.reset(self.parser)
pr_block = self.__getattr__(partial_region)
pr_block.download(bitfile_name=partial_bit, dtbo=dtbo)
pr_parser = pr_block.parsers[pr_block.pr_loaded]
pr_dtbo = pr_block.bitstreams[partial_bit].dtbo
self.device.update_partial_region(partial_region, pr_parser)
self._deepcopy_dict_from(self.device)
self.pr_dict[partial_region] = {'loaded': pr_block.pr_loaded,
'dtbo': pr_dtbo}
description = _complete_description(
self.ip_dict, self.hierarchy_dict, self.ignore_version,
self.mem_dict, self.device)
self._ip_map = _IPMap(description)
[docs] def is_loaded(self):
"""This method checks whether a bitstream is loaded.
This method returns true if the loaded PL bitstream is same
as this Overlay's member bitstream.
Returns
-------
bool
True if bitstream is loaded.
"""
if not self.timestamp == '':
return self.timestamp == self.device.timestamp
else:
return self.bitfile_name == self.device.bitfile_name
[docs] def reset(self):
"""This function resets all the dictionaries kept in the overlay.
This function should be used with caution. In most cases, only those
dictionaries keeping track of states need to be updated.
Returns
-------
None
"""
self.ip_dict = self.parser.ip_dict
self.gpio_dict = self.parser.gpio_dict
self.interrupt_controllers = self.parser.interrupt_controllers
self.interrupt_pins = self.parser.interrupt_pins
if self.is_loaded():
self.device.reset(self.parser, self.timestamp, self.bitfile_name)
[docs] def load_ip_data(self, ip_name, data):
"""This method loads the data to the addressable IP.
Calls the method in the super class to load the data. This method can
be used to program the IP. For example, users can use this method to
load the program to the Microblaze processors on PL.
Note
----
The data is assumed to be in binary format (.bin). The data name will
be stored as a state information in the IP dictionary.
Parameters
----------
ip_name : str
The name of the addressable IP.
data : str
The absolute path of the data to be loaded.
Returns
-------
None
"""
self.device.load_ip_data(ip_name, data)
self.ip_dict[ip_name]['state'] = data
def __dir__(self):
return sorted(set(super().__dir__() +
list(self.__dict__.keys()) + self._ip_map._keys()))
def _register_drivers(self):
"""Imports plugin modules registered against `pynq.lib`, so that IP
drivers contained in these modules can be registered automatically.
"""
import importlib
drivers_ext_man = _ExtensionsManager(DRIVERS_GROUP)
for ext in drivers_ext_man.list:
importlib.import_module(ext.module_name)
_ip_drivers = dict()
_hierarchy_drivers = collections.deque()
[docs]class RegisterIP(type):
"""Meta class that binds all registers all subclasses as IP drivers
The `bindto` attribute of subclasses should be an array of strings
containing the VLNV of the IP the driver should bind to.
"""
def __init__(cls, name, bases, attrs):
if 'bindto' in attrs:
for vlnv in cls.bindto:
_ip_drivers[vlnv] = cls
_ip_drivers[vlnv.rpartition(':')[0]] = cls
super().__init__(name, bases, attrs)
[docs] def unregister(cls):
"""Unregister a subclass from the driver registry
"""
if hasattr(cls, 'bindto'):
for vlnv in cls.bindto:
vln = vlnv.rpartition(':')[0]
if _ip_drivers.get(vlnv, None) == cls:
del _ip_drivers[vlnv]
if _ip_drivers.get(vln, None) == cls:
del _ip_drivers[vln]
_struct_dict = {
# Base Vitis int types
'char': 'c',
'signed char': 'b',
'unsigned char': 'B',
'short': 'h',
'unsigned short': 'H',
'int': 'i',
'unsigned int': 'I',
'long int': 'l',
'long unsigned int': 'L',
'long long int': 'q',
'long long unsigned int': 'Q',
# Base Vitis floating point types
'float': 'f',
'double': 'd',
# Other types seen in the wild
'long': 'l',
'uint': 'I',
'ushort': 'H'
}
def _ctype_to_struct(ctype):
ctype = ctype.replace('const', '').strip()
return _struct_dict[ctype]
XrtArgument = collections.namedtuple('XrtArgument',
['name', 'index', 'type', 'mem'])
def _create_call(regmap):
from inspect import Parameter, Signature
sorted_regmap = list(regmap.items())
sorted_regmap.sort(key=lambda x: x[1]['address_offset'])
parameters = []
ptr_list = []
struct_string = "="
arg_details = {}
for k, v in sorted_regmap:
curr_offset = struct.calcsize(struct_string)
reg_offset = v['address_offset']
if reg_offset < curr_offset:
raise RuntimeError("Struct string generation failed")
elif reg_offset > curr_offset:
struct_string += "{}x".format(reg_offset - curr_offset)
reg_type = v['type']
if "*" in reg_type:
struct_string += "Q"
ptr_type = True
else:
struct_string += _struct_dict[v['type']]
ptr_type = False
if k != 'CTRL':
ptr_list.append(ptr_type)
parameters.append(Parameter(
k, Parameter.POSITIONAL_OR_KEYWORD,
annotation=v['type']))
arg_details[k] = XrtArgument(
k, len(parameters), v['type'],
v['memory'] if 'memory' in v else None)
signature = Signature(parameters)
return signature, struct_string, ptr_list, arg_details
[docs]class WaitHandle:
def __init__(self, target):
self.target = target
[docs] def wait(self):
while self.target.mmio.read(0) & 0x4 != 0x4:
pass
[docs]class DefaultIP(metaclass=RegisterIP):
"""Driver for an IP without a more specific driver
This driver wraps an MMIO device and provides a base class
for more specific drivers written later. It also provides
access to GPIO outputs and interrupts inputs via attributes. More specific
drivers should inherit from `DefaultIP` and include a
`bindto` entry containing all of the IP that the driver
should bind to. Subclasses meeting these requirements will
automatically be registered.
Attributes
----------
mmio : pynq.MMIO
Underlying MMIO driver for the device
_interrupts : dict
Subset of the PL.interrupt_pins related to this IP
_gpio : dict
Subset of the PL.gpio_dict related to this IP
"""
def __init__(self, description):
if 'device' in description:
self.device = description['device']
else:
from .pl_server.device import Device
self.device = Device.active_device
self.mmio = MMIO(description['phys_addr'], description['addr_range'],
device=self.device)
if 'interrupts' in description:
self._interrupts = description['interrupts']
else:
self._interrupts = {}
if 'gpio' in description:
self._gpio = description['gpio']
else:
self._gpio = {}
for interrupt, details in self._interrupts.items():
try:
setattr(self, interrupt, Interrupt(details['fullpath']))
except ValueError as e:
warnings.warn('Interrupt {} not created: {}'.format(
interrupt, str(e)))
setattr(self, interrupt, None)
for gpio, entry in self._gpio.items():
gpio_number = GPIO.get_gpio_pin(entry['index'])
setattr(self, gpio, GPIO(gpio_number, 'out'))
if 'registers' in description:
self._registers = description['registers']
self._register_name = description['fullpath'].rpartition('/')[2]
if ('CTRL' in self._registers and
self.device.has_capability('CALLABLE')):
self._signature, struct_string, self._ptr_list, self.args = \
_create_call(self._registers)
self._call_struct = struct.Struct(struct_string)
else:
self._registers = None
if 'index' in description:
self.cu_mask = 1 << description['adjusted_index']
self._setup_packet_prototype()
if 'streams' in description:
self.streams = {}
for k, v in description['streams'].items():
stream = self.device.get_memory_by_idx(v['stream_id'])
self.streams[k] = stream
if v['direction'] == 'output':
stream.source_ip = self
elif v['direction'] == 'input':
stream.sink_ip = self
if self.signature is None:
self._start = self.start_none
elif self.device.has_capability('ERT'):
self._start = self.start_ert
else:
self._start = self.start_sw
def _setup_packet_prototype(self):
self._packet = ert.ert_start_kernel_cmd()
self._packet.m_uert.m_start_cmd_struct.state = \
ert.ert_cmd_state.ERT_CMD_STATE_NEW
self._packet.m_uert.m_start_cmd_struct.unused = 0
self._packet.m_uert.m_start_cmd_struct.extra_cu_masks = 0
self._packet.m_uert.m_start_cmd_struct.count = \
(self._call_struct.size // 4) + 1
self._packet.m_uert.m_start_cmd_struct.opcode = \
ert.ert_cmd_opcode.ERT_START_CU
self._packet.m_uert.m_start_cmd_struct.type = \
ert.ert_cmd_type.ERT_DEFAULT
self._packet.cu_mask = self.cu_mask
@property
def register_map(self):
if not hasattr(self, '_register_map'):
if self._registers:
self._register_map = RegisterMap.create_subclass(
self._register_name,
self._registers)(self.mmio.array)
else:
raise AttributeError(
"register_map only available if the .hwh is provided")
return self._register_map
@property
def signature(self):
"""The signature of the `call` method
"""
if hasattr(self, "_signature"):
return self._signature
else:
return None
[docs] def call(self, *args, **kwargs):
self.start(*args, **kwargs).wait()
[docs] def start_sw(self, *args, ap_ctrl=1, waitfor=None, **kwargs):
"""Start the accelerator
This function will configure the accelerator with the provided
arguments and start the accelerator. Use the `wait` function to
determine when execution has finished. Note that buffers should be
flushed prior to starting the accelerator and any result buffers
will need to be invalidated afterwards.
For details on the function's signature use the `signature` property.
The type annotations provide the C types that the accelerator
operates on. Any pointer types should be passed as `ContiguousArray`
objects created from the `pynq.Xlnk` class. Scalars should be passed
as a compatible python type as used by the `struct` library.
"""
if not self._signature:
raise RuntimeError("Only HLS IP can be called with the wrapper")
if waitfor is not None:
raise RuntimeError(
"waitfor only supported on newer versions of XRT")
if kwargs:
# Resolve any kwargs to make a single args tuple
args = self._signature.bind(*args, **kwargs).args
# Resolve and pointers that need .device_address taken
args = [a.device_address if p else a
for a, p in itertools.zip_longest(args, self._ptr_list)]
self.mmio.write(0, self._call_struct.pack(0, *args))
self.mmio.write(0, ap_ctrl)
return WaitHandle(self)
[docs] def start_none(self, *args, **kwargs):
raise RuntimeError("Start only supported for XCLBIN-based designs")
[docs] def start(self, *args, **kwargs):
"""Start the accelerator
This function will configure the accelerator with the provided
arguments and start the accelerator. Use the `wait` function to
determine when execution has finished. Note that buffers should be
flushed prior to starting the accelerator and any result buffers
will need to be invalidated afterwards.
For details on the function's signature use the `signature` property.
The type annotations provide the C types that the accelerator
operates on. Any pointer types should be passed as `ContiguousArray`
objects created from the `pynq.Xlnk` class. Scalars should be passed
as a compatible python type as used by the `struct` library.
"""
# For now direct people to the sw version until the ERT initialization
# is fixed
return self._start(*args, **kwargs)
[docs] def start_ert(self, *args, waitfor=(), **kwargs):
"""Start the accelerator using the ERT scheduler
This function will use the embedded scheduler to call the accelerator
with the provided arguments - see the documentation for ``start`` for
more details. An optional ``waitfor`` parameter can be used to
schedule dependent executions without using the CPU.
Parameters
----------
waitfor : [WaitHandle]
A list of wait handles returned by other calls to ``start_ert``
which must complete before this execution starts
Returns
-------
WaitHandle :
Object with a ``wait`` call that will return when the execution
completes
"""
if not self._signature:
raise RuntimeError("Only HLS IP can be called with the wrapper")
if kwargs:
# Resolve any kwargs to make a single args tuple
args = self._signature.bind(*args, **kwargs).args
args = [a.device_address if p else a for a, p in zip(args,
self._ptr_list)]
arg_data = self._call_struct.pack(0, *args)
bo = self.device.get_exec_bo()
exec_packet = bo.as_packet(ert.ert_start_kernel_cmd)
exec_packet.m_uert.header = self._packet.m_uert.header
exec_packet.cu_mask = self.cu_mask
ctypes.memmove(exec_packet.data, arg_data, len(arg_data))
wait_bos = tuple(w._bo for w in waitfor if w is not None and w._has_bo)
if wait_bos:
return self.device.execute_bo_with_waitlist(bo, wait_bos)
else:
return self.device.execute_bo(bo)
[docs] def read(self, offset=0):
"""Read from the MMIO device
Parameters
----------
offset : int
Address to read
"""
return self.mmio.read(offset)
[docs] def write(self, offset, value):
"""Write to the MMIO device
Parameters
----------
offset : int
Address to write to
value : int or bytes
Data to write
"""
self.mmio.write(offset, value)
class _IPMap:
"""Class that stores drivers to IP, hierarches, interrupts and
gpio as attributes.
"""
def __init__(self, desc):
"""Create a new _IPMap based on a hierarchical description.
"""
self._description = desc
def __getattr__(self, key):
if key in self._description['hierarchies']:
hierdescription = self._description['hierarchies'][key]
hierarchy = hierdescription['driver'](hierdescription)
setattr(self, key, hierarchy)
return hierarchy
elif key in self._description['ip']:
ipdescription = self._description['ip'][key]
try:
driver = ipdescription['driver'](ipdescription)
except UnsupportedConfiguration as e:
warnings.warn(
"Configuration if IP {} not supported: {}".format(
key, str(e.args)),
UserWarning)
driver = DefaultIP(ipdescription)
setattr(self, key, driver)
return driver
elif key in self._description['interrupts']:
interrupt = Interrupt(
self._description['interrupts'][key]['fullpath'])
setattr(self, key, interrupt)
return interrupt
elif key in self._description['gpio']:
gpio_index = self._description['gpio'][key]['index']
gpio_number = GPIO.get_gpio_pin(gpio_index)
gpio = GPIO(gpio_number, 'out')
setattr(self, key, gpio)
return gpio
elif key in self._description['memories']:
mem = self._description['device'].get_memory(
self._description['memories'][key])
setattr(self, key, mem)
return mem
else:
raise AttributeError(
"Could not find IP or hierarchy {} in overlay".format(key))
def _keys(self):
"""The set of keys that can be accessed through the IP map
"""
return (list(self._description['hierarchies'].keys()) +
list(i for i in self._description['ip'].keys()) +
list(i for i in self._description['interrupts'].keys()) +
list(i for i in self._description['gpio'].keys()) +
list(g for g in self._description['memories'].keys()))
def __dir__(self):
return sorted(set(super().__dir__() +
list(self.__dict__.keys()) +
self._keys()))
[docs]def DocumentOverlay(bitfile, download):
"""Function to build a custom overlay class with a custom docstring
based on the supplied bitstream. Mimics a class constructor.
"""
class DocumentedOverlay(Overlay):
def __init__(self):
super().__init__(bitfile, download=download)
overlay = DocumentedOverlay()
DocumentedOverlay.__doc__ = _build_docstring(overlay._ip_map._description,
bitfile,
"overlay")
return overlay
[docs]def DocumentHierarchy(description):
"""Helper function to build a custom hierarchy class with a docstring
based on the description. Mimics a class constructor
"""
class DocumentedHierarchy(DefaultHierarchy):
def __init__(self):
super().__init__(description)
hierarchy = DocumentedHierarchy()
DocumentedHierarchy.__doc__ = _build_docstring(description,
description['fullpath'],
"hierarchy")
return hierarchy
[docs]class RegisterHierarchy(type):
"""Metaclass to register classes as hierarchy drivers
Any class with this metaclass an the `checkhierarchy` function
will be registered in the global driver database
"""
def __init__(cls, name, bases, attrs):
if 'checkhierarchy' in attrs:
_hierarchy_drivers.appendleft(cls)
super().__init__(name, bases, attrs)
[docs] def unregister(cls):
if cls in _hierarchy_drivers:
_hierarchy_drivers.remove(cls)
[docs]class DefaultHierarchy(_IPMap, metaclass=RegisterHierarchy):
"""Hierarchy exposing all IP and hierarchies as attributes
This Hierarchy is instantiated if no more specific hierarchy class
registered with register_hierarchy_driver is specified. More specific
drivers should inherit from `DefaultHierarachy` and call it's constructor
in __init__ prior to any other initialisation. `checkhierarchy` should
also be redefined to return True if the driver matches a hierarchy.
Any derived class that meets these requirements will automatically be
registered in the driver database.
Attributes
----------
description : dict
Dictionary storing relevant information about the hierarchy.
parsers : dict
Parser objects for partial block design metadata.
bitstreams : dict
Bitstream objects for partial designs.
pr_loaded : str
The absolute path of the partial bitstream loaded.
"""
def __init__(self, description):
self.description = description
self.parsers = dict()
self.bitstreams = dict()
self.pr_loaded = ''
self.device = description['device']
super().__init__(description)
[docs] @staticmethod
def checkhierarchy(description):
"""Function to check if the driver matches a particular hierarchy
This function should be redefined in derived classes to return True
if the description matches what is expected by the driver. The default
implementation always returns False so that drivers that forget don't
get loaded for hierarchies they don't expect.
"""
return False
[docs] def download(self, bitfile_name, dtbo):
"""Function to download a partial bitstream for the hierarchy block.
Since it is hard to know which hierarchy is to be reconfigured by only
looking at the metadata, we assume users will tell this information.
Thus, this function should be called only when users are sure about
the hierarchy name of the partial region.
Parameters
----------
bitfile_name : str
The name of the partial bitstream.
dtbo : str
The relative or absolute path of the partial dtbo file.
"""
if self.pr_loaded:
self._find_bitstream_by_abs(self.pr_loaded).remove_dtbo()
self._locate_metadata(bitfile_name, dtbo)
self._parse(bitfile_name)
self._load_bitstream(bitfile_name)
if dtbo:
self.bitstreams[bitfile_name].insert_dtbo()
def _find_bitstream_by_abs(self, absolute_path):
for i in self.bitstreams.keys():
if self.bitstreams[i].bitfile_name == absolute_path:
return self.bitstreams[i]
return None
def _locate_metadata(self, bitfile_name, dtbo):
self.bitstreams[bitfile_name] = Bitstream(bitfile_name, dtbo,
partial=True)
bitfile_name = self.bitstreams[bitfile_name].bitfile_name
self.parsers[bitfile_name] = self.device.get_bitfile_metadata(
bitfile_name)
def _parse(self, bitfile_name):
bitfile_name = self.bitstreams[bitfile_name].bitfile_name
fullpath = self.description['fullpath']
ip_dict = dict()
for k, v in self.parsers[bitfile_name].ip_dict.items():
ip_dict_id = fullpath + '/' + v['mem_id']
ip_dict[ip_dict_id] = v
ip_dict[ip_dict_id]['fullpath'] = fullpath + '/' + v['fullpath']
self.parsers[bitfile_name].ip_dict = ip_dict
self.parsers[bitfile_name].nets = {
fullpath + '_' + s: {
fullpath + '/' + i for i in p}
for s, p in self.parsers[bitfile_name].nets.items()
if s is not None and p is not None
}
self.parsers[bitfile_name].pins = {
fullpath + '/' + p: fullpath + '_' + s
for p, s in self.parsers[bitfile_name].pins.items()
if s is not None and p is not None
}
def _load_bitstream(self, bitfile_name):
self.bitstreams[bitfile_name].download()
self.pr_loaded = self.bitstreams[bitfile_name].bitfile_name