The Audio module provides methods to read audio from the input microphone, play audio to the output speaker, or read and write audio files. The audio module connects to the audio IP subsystem in in overlay to capture and playback data. The audio module is intended to support different IP subsystems. It currently supports the line-in, HP/Mic with the ADAU1761 codec on the PYNQ-Z2 and the Pulse Width Modulation (PWM) mono output and Pulse Density Modulated (PDM) microphone input on the PYNQ-Z1 board.
from pynq.overlays.base import BaseOverlay base = BaseOverlay("base.bit") pAudio = base.audio pAudio.load("/home/xilinx/pynq/lib/tests/pynq_welcome.pdm") pAudio.play()
from pynq.overlays.base import BaseOverlay base = BaseOverlay("base.bit") pAudio = base.audio pAudio.load("/home/xilinx/jupyter_notebooks/base/audio/data/recording_0.wav") pAudio.play()
(Note the PYNQ-Z1 supports direct playback of PDM out, and the PYNQ-Z2 supports Wav.)
More information about the Audio module and the API for reading and writing audio interfaces, or loading and saving audio files can be found in the pynq.lib.audio Module section.
For more examples see the Audio notebook on your PYNQ-Z1 or PYNQ-Z2 board: at: